Thermoflock material colors are limited. COLORS: WHITE - BLACK - GOLD - RED - ROYAL and has only 1 foreground color choice, no background color.
Two-color Thermo-FLOCK is NOT recommended because the fibers on the background are not a stable or solid surface for the adhesive on the foreground to adhere to.
For a two-color look, use Thermo-FILM for the background and Thermo-FLOCK® as the foreground. Align the Thermo-FILM background and Thermo-FLOCK foreground together and heat seal together in one step. Add 1-2 seconds for heat to penetrate the
increased thickness.
APPLICATION INSTRUCTIONS:
Preheat Bottom Pad
Before application, lower the top
platen for 60 seconds. This helps the
adhesive to melt properly during application.
Preheat Garment!
Place garment on bottom pad and
press for 5-10 seconds to remove
moisture and chemical treatment from
lettering area on garment.
2. Layout Lettering
Place adhesive side (the milky-white
finish) down on garment.
3. Cover Lettering
To protect garment and lettering, use
a cover sheet such Kraft paper before application.
4. Heat Apply—
Temperature: 330°F; 165°C
Time: 8-10 seconds
Pressure: Medium
